YUKIWA BT50-SGC10-120 Super G1 Collet Holder

Super G1Chuck BT50-SGC10-120

Features

• We limit the changes of the body, locking nut and chuck to achieve a high-precision overall core runout accuracy of5μm.
• The BT tool holder is fully ground from the front end of the V-shaped flange to the neck, achieving a high level of balance.
• Standard products are safe to use up to25000min-1.
• End milling cutters with high rigidity and high clamping force play a powerful role in horizontal drawing.
• High rigidity is ensured by reducing the amount of chuck protruding from the body and increasing the thickness of the chuck insertion portion of the body.
• The taper angle of the tip is1/10taper (5°4329"), which increases the clamping force by a factor of1.5(compared to our company).
• Shows sufficient power for high-speed milling with end mills.
• The locking nuts that bind the steel balls are generally threaded on the nuts and screws are used to prevent the steel balls from popping out.
• The steel safety shield is pressed on the periphery of the lock nut and riveted, so it can be used safely at high speeds.

Specifications

• Gripping capacity of chuck (d; mm):2.0to10.0
• Nut outer diameter (D; mm):31
• Total length (L1; mm):221.8
• Length of standard diameter (L2; mm):120
• Length adjustment screw (g; mm): M12x1.5
• Maximum length adjustment screw (l; mm):43
• Taper: BT50(7/24)
• Weight (kg):3.9
• Use chuck: SG10
• Spanner used: FS33
• Length adjustment screw: APM10-2
• Coolant seal screw: CSE10/CSH10
• * Screw size g is a special Yukiwa Seiko screw. It is not possible to install commercially available fixing screws, etc.
• * The shape of the bottle handle taper of the ATC is made according to MA S standard.
• * Please order the studs, collet and wrench separately.
• * Dimension l is the length from the nut end face to the length of the adjusting screw end face.