Product overview

Read full descriptionShow less

Features

This is a very responsive pH meter with a new high sensitivity sensor as standard.
The new sensor with excellent reproducibility allows for precise pH adjustment with ease.
The automatic calibration function makes calibration easy.
Displays both pH and temperature.
Interrupting the setup function * prevents overfilling of the adjustment reagent and enables high-precision adjustment.
* The interrupt setting function is a function to set the injection and standby time when injecting reagents. Considering agitation and reaction delays prevents over-injection of reagents.
The hysteresis setting allows you to change the control start pH and end pH. You can also set a delay time.
There are two control output contacts. Acid injection and alkali injection can be set.
The control direction can be set freely for both contacts. If the response is unidirectional, one contact can be used for control, while the other contact can operate the lamp or buzzer.
pH and temperature are displayed at the same time.
The analog output can be selected from0~20mA and4~20mA, which can be set at will. Also, thanks to the zoom feature, you can zoom in and record small changes. Since the output is insulated, data can be collected by direct input to the PC's A/D conversion board.
Specifications

Measurement range pH→0.00~14.00pH
Temperature →0.0to100°C
Resolution pH→0.01pH
Temperature →0.1℃
Accuracy ±0.01±1digit
Display pH →4bit led mode
TEMPERATURE
Temperature Compensation0to100°C Automatic Temperature Compensation
Ambient temperature0-50°C85% RH or less
Power supply AC100V50/60Hz
Body size186(W) x174(H) x170(D) mm
Quality1.6kg