SAKAGUCHI MPI Immersion Heater

Flexible polyimide heater for normal use at200℃. It is a lead-free product that does not use any solder.

Features

It is a heater that can be used normally at temperatures up to200°C as it uses a special polyimide film with high heat resistance as a holderInsulator for high heat-resistant electric heating wires.

• Uniform temperature distribution
  The foil-shaped electric heating wire is evenly arranged on the surface of the heater, and the heating area accounts for a large surface area of the heater, the heating is uneven and small, and the thermal efficiency is high.

• It is an eco-friendly heater that is developed to take full advantage of environmental
  The manufacturing method of the terminal structure with the characteristics of a thin type heater realizes a lead-free connection between the lead wire and the terminal part.
• 
  Since no adhesive is used to bondA low release insulator, so it is a heater that produces very little release.In addition, since siloxane gas is not produced, it can be used in an undesirable environment.

• Fast heating response
  The thickness of the insulator is less than0.2mm, and the heat capacity is small, so the heater responds particularly quickly to the heating of the heated object.

• Wide range of circuit designs
  Since the circuit distribution and shape can be changed by precise etching, the heat distribution can be designed according to the application.

MPI Type

Shapes

One (mm)	B (mm)	C (mm)	Voltage (V)	Capacity (W)	Product code
25.4	25.4	200	28 28	The Fifth Semester	MPI-11
25.4	50.8	200	28 28	X	MPI-12
25.4	76.2	200	28 28	15	MPI-13

Standard specifications

Heater Surface Temperature	Regular use200℃ (usable temperature varies depending on actual use environment, for reference only)
Power density	① Suspended in static air: maximum1.0w/cm2 ② When in close contact with the heated object: maximum1.5w/cm2
Insulation resistance	DC500V trillion100MΩ or more
Thickness	0.2mm or less (excluding lead connection)

Usage notes

WARNING

If this product is improperly handled, it may cause accidents such as electric shock or fire, so please strictly observe the following when using this product.

[Ignition precautions]

• ● Never use this product at a voltage higher than the rated value.
• ● Non-explosion-proof construction, do not use in flammable environments.
• ● Keep away from flammable items.

[Electric shock precautions]

• ● Do not scratch the heater surfaces and wires.
• For indoor use ● only, not waterproof. Do not allow the heater to get wet from water, liquids, steam, etc.

[High Temperature Precautions]

• ● The heater and its peripherals will be very hot during and after use, so do not touch them until they are fully cooled.

Usage notes

Please note that product damage may result if you do not comply with the following processing items.

General

• ● Do not use at temperatures above product specifications. Be sure to control the temperature and use it at the appropriate temperature.
• ● Do not repair, modify or disassemble by yourself.
• ● Do not use in corrosive or high humidity environments.
• ● Do not forcibly bend or pull the wire.
• ● Do not bend the heater.
• ● If you notice any abnormalities such as smoke or odors, stop using the heater immediately.
• ● Store in a clean and dry place away from direct sunlight.
• ● If the degree of adhesion to the heated object is low, the temperature will become abnormally high, which may lead to premature disconnection.
• Contact sales when ● pasting on heated objects.
• ● Note that the joints of the leads are particularly susceptible to external forces (tension, bending, etc.).
• ● Do not stack heaters.