Overview
Product overview Read full description Show less Features Excellent flexibility. Suitable for general pneumatic piping requiring a small bending radius. Convenient cutting marks are shown at intervals of approximately 500 mm. Product specifications Specifications Working pressure: 0.8MPa (20℃, 65%RH) Vacuum pressure: -100 kPa Operating temperature range: -15 to 60°C (no freezing) Color: transparent blue Outer diameter (mm): 3 Inner diameter (mm): 2 Minimum bending radius (mm): 8 Applicable fluids: air and water (subject to conditions) Overall length (m): 20 Materials TPU (thermoplastic polyurethane) Mass Operating conditions When using water, keep surge pressure below the maximum working pressure. Always use an insert ring when connecting to a push-in fitting and using water. Notes Do not apply tensile, twisting or extreme bending loads, which may cause tube collapse, rupture or disconnection. Do not scratch or abrade the tube through rubbing, as this may cause rupture. Tube burst pressure decreases as temperature rises. Confirm the working pressure and use an adequate safety factor. Use the tube at or above the minimum bending radius. Allow sufficient piping margin for changes in length.
Features Please provide the complete model, quantity, application and operating conditions so we can check the requirement against the product documentation.
Specifications & Models
Specifications Need to confirm UB0320? The inquiry automatically includes this product, brand, representative model and source page.
Submit an inquiry 
