Overview
Product overview
Product information
Features
- Compact design incorporating a FUJI touch connector.
- Excellent flow characteristics allow fine adjustment in the low-flow range.
- The freely rotating tube outlet above the A-type speed-controller thread provides a 360-degree tube takeoff direction.
- Inward and outward metering types are identified by knob color: black for inward and yellow for outward.
- Identification rings can be installed.
- Tube material can be selected.
- Seal treatment on the R-thread section.
- The lock ring rotates internally, preventing the tube from being twisted or cut.
Specifications
Fluid | Compressed air |
Operating temperature range | -5～60℃ |
Maximum operating pressure | 0.05MPa~0.7MPa |
Compatible tubing | TE, TP, MTP (polyurethane tubing), TN (nylon tubing) |
4-M5SC-O、4-M5SC-I、4-01SC-O、4-01SC-I、6-M5SC-O、6-M5SC-I、6-01SC-O、6-01SC-I、6-02SC-O、6-02SC-I、8-01SC-O、8-01SC-I、8-02SC-O、8-02SC-I、10-02SC-O、10-02SC-I、10-03SC-O、10-03SC-I、10-04SC-O、10-04SC-I、12-03SC-O、12-03SC-I、12-04SC-O、12-04SC-I
Features
- 8-02SC-O speed controller
Please provide the complete model, quantity, application and operating conditions so we can check the requirement against the product documentation.
Specifications & Models
Specifications
Models
| Model | Inquiry |
|---|---|
| 10-02SC-O | Inquire |
Related Content
Related products
TRUSCO
P40T-1-MAS Pull Stud for BT40, MAS-I Type
The TRUSCO P40T-1-MAS is a pull stud for drawing in a BT toolholder. It is manufactured from SNCM420 nickel-chromium-molybdenum steel and follows the MAS-I 45-degree form without a center through-hole. The listed body taper is BT40, the thread diameter is M16, and the product mass is 74 g.
CHIYODA
FH-16 Water-Resistant Braided Polyurethane Hose
CHIYODA FH-16 is a flexible braided polyurethane hose for compressed air and industrial water. It is designed for easy connection and uses an environmentally considerate material. The listed temperature ranges are -5 to 60 ℃ for compressed air and 5 to 40 ℃ for industrial water. Burst pressure is 5 MPa, while maximum working pressures are 1.0 MPa and 0.3 MPa respectively. Industrial-water back pressure must be considered.
CHIYODA
CKL10-02 Elbow Fitting
The CHIYODA CKL10-02 is an all-metal elbow fitting for pneumatic piping. The product information covers compressed air, industrial water and vacuum service, with fluid-specific temperature and pressure limits. It also describes S-type tubing compatibility and the need to check tubing dimensions and water back pressure before selecting a connection.
TONE
BL900 Long Ball-End Hex Key Set
TONE BL900 is a long ball-end hex key set for tightening and loosening hex socket cap screws. The ball-end design supports quick turning and temporary tightening from an angle, while the special alloy steel provides torque capacity, durability and wear resistance. The nine-piece set includes 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm sizes with a holder.
CHIYODA
LE-8 Double-Layer Pneumatic Tubing
The CHIYODA LE-8 uses TE-series inner tubing for compressed air or cooling water, with a protective outer layer. Printed stripping marks and airflow arrows assist installation. Its listed features include abrasion, oil, heat and cold resistance, and a lightweight construction. The outer layer must be stripped before the tubing is connected.
CHIYODA
MFX-02M Megaflow X Coupling
CHIYODA MFX-02M is part of the Megaflow X coupling range for pneumatic tools and equipment. The source highlights full-flow design, one-touch connection and safety interlocking intended to reduce hose whip and recoil during disconnection. Confirm the plug, tube, thread and operating-pressure requirements before selection.
Need to confirm 10-02SC-O?
The inquiry automatically includes this product, brand, representative model and source page.
Submit an inquiry